Cornelius I Series Especificaciones descargar pdf (Pagina 16)

TP00952

November 26, 2001 11

SANITIZING THE WATER SYSTEM AND THE EVAPORATOR

NOTE: To be performed only after cleaning the ice machine:

1. Turn the power switch to “OFF”.

2. Add 1/4 ounce (7.08 g) sodium hypochlorite solution (common liquid laundry bleach) to the water

pan. You may also use a commercial sanitizer such as Calgon Ice Machine Sanitizer following the

directions on the product label.

3. Turn the Cuber power switch “ON” allowing the compressor to start. Depress the clean button two

times on the control board. The unit will run through a 15 minute sanitizing cycle.

4. Once the sanitizing cycle is complete, the error LED will flash 8 times. Turn the power switch to

“OFF” for 5 seconds and then turn to “ON”. Discard the first batch of ice produced.

5. To sanitize the bin and other surface areas, use 1 ounce of liquid bleach per gallon of water and wipe

all areas with the solution. Or use a commercial sanitizer.

6. Cleaning and sanitizing are now complete. Cuber may be returned to normal service.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 53 54

Sin comentarios

Cornelius I Series Especificaciones Pagina 16