Cornelius CH 1502-A Manual del operador descargar pdf (Pagina 6)

92074

MAINTENANCE

CAUTION: Disconnect electrical power before performing any maintenance.

1. Keep condenser fins clean by blowing compressed air through the fins from the fan side as required to

eliminate any dirt or debris.

2. Drain and flush circulation system periodically to reduce the chance of restriction due to contaminants in

the water.

3. Clean strainer monthly.

SERVICE

When servicing the Chiller, it is important to note the information on the Data Plate located on the rear of the

unit. If necessary, call the service number on the Data Plate and have all information ready to give the techni-

cian on the telephone.

The Serial Number is required to order parts or make any warranty claims.

REMCOR PRODUCTS CO.

GLENDALE HEIGHTS. IL 60139

MODEL N O.

SERIAL NO.

VOLTS AMPS

CH1502–A

R–22 6 LBS.7.3A 60HZ230V 3PH

XXXX

FIGURE 1. SAMPLE DATA PLATE FOR CH–1502–A

Removing Wrapper

1. Disconnect power to unit.

2. Loosen all screws that secure wrapper, quantity 16.

3. Lift wrapper straight up.

Replacing Thermostat

1. Remove wrapper as stated above.

2. Note the location of all wires coming out of the back of thermostat.

3. Loosen screw terminals securing the wires at the rear of the thermostat and remove wires.

4. Loosen the mounting bracket with the phillips head screw in back of the thermostat.

5. Remove thermostat through front of panel.

6. Reverse for installation.

1 2 3 4 5 6 7 8 9 10 11 12 13

Sin comentarios

Cornelius CH 1502-A Manual del operador Pagina 6