Cornelius 000 PLUS Manual descargar pdf (Pagina 3)

CLASSIC 1000

REMOTE COOLER

2. AIR COOLED MODEL

INSTALLATION INSTRUCTIONS

2.1 SITING

2.2 SITING & INSTALLATION DIAGRAM

Remote

Cellar

Ensure Unit is

mounted on a level

surface

Unit requires

adequate ventilation

Chilled

Cellar

SIDE VIEW

Install on

firm level

surface

100mm (minimum) clearance

required to allow adequate ventilation

2.0m max

PLAN

13A Socket

Castors allow

movement in

any direction

1. Do not drag over rough floors or down steps and

always keep in an upright position.

2. Site as near to the stored product as possible.

3. Avoid siting in a chilled cellar, unless cellar cooling

is uprated by 1.5kw

4. Allow access to side and front panels, for

maintenance and servicing.

5. Avoid siting the unit in warm areas with poor

ventilation (i.e. cupboards or small storerooms).

6. Prevent exposure to water spillage, spray or very

high humidity.

7. Never allow air vents (louvres) to become

obstructed or blocked.

8. Protect from physical damage and do not place

heavy items on top.

9. Locate the Classic 1000 within 2m of a grounded,

switched, 13 amp, 230V socket which is easily

accessible for isolation of the cooler.

The socket should be installed to current IEE

regulations. It is recommended that the mains

electrical supply is protected by RCCB.

The Cooler must be earthed.

10. The cooler is designed to operate in the range of

ambient temperatures from 10°C up to 35°C.

▼

1 2 3 4 5 6 7 8 ... 20 21

Comentarios a estos manuales

Sin comentarios

Cornelius 000 PLUS Manual Pagina 3

Comentarios a estos manuales

Relacionado con productos y manuales para No Cornelius 000 PLUS